Connect the USB flash drive to the Parrot Skycontroller. This step is optional but it will allow you to view the update file installation status. Do not rename the file.Ĭonnect the Parrot Skycontroller to a screen using a HDMI cable. Do not place the update file in any directory.
Move the update file to the root of your USB Flash drive. plf file is the update file you have to install on your Parrot Skycontroller. Usually, you have to right-click on your USB flash drive. The procedure to format a USB flash drive to FAT32 depends on your operating system. Make sure that your USB flash drive is formatted to FAT32 and not NTFS and that it has no other plf file.
Wait for synchronization between Parrot Skycontroller 3 and ANAFI (steady dark blue LED on the controller): check that the left trigger of the Parrot Skycontroller 3 activates the drone’s gimbal camera tilt to ensure the synch is complete.Īfter pairing is confirmed connect smart device to controller to see if you connect thru FF6 and to complete update if necessary- Connect your USB flash drive to a computer. The LED of the Parrot Skycontroller 3 flashes briefly in green: it is acknowledging ANAFI.Ħ. Plug the drone and the controller together with an USB-A (controller) to USB-C (drone) cable.ĥ. Open the Parrot Skycontroller 3 to power it on.Ĥ. Check a compatible microSD card is inserted into ANAFI.ģ. Make sure that no other device is connected on ANAFI’s wi-fi networkġ. This procedure is useful to pair a drone and a controller which have never been paired, and to restore the lost pairing between a drone and a controller. Pairing ANAFI to a Parrot Skycontroller 3 You may want to check that the controller is paired correctly to AnafiĪlso looks like parrots web site is back online now Is this a new drone or have you flown with the controller before?
0 kommentar(er)
